User's Manual

To set System ID:
1. From the System ID drop down box, select the ID number to use.
2. Click the Update Butler button to save the settings.
3. Reprogram pagers used with the system (refer to Programming Pagers on pg. 10).
Group Paging Enable
Group Paging allows you to page 2 or more pagers at the same time. You must program the pagers in the
same group. (See Programming Pagers on pg. 13)
To enable Group Paging:
When group paging is enabled, pager numbers 1-99 will be used to page a “group”. (See p. 10 to con-
figure Group Paging settings)
Beep Enable
This feature will enable or disable the Butler from beeping when the “Service” button is pressed, and when
the USB connection is made.
To set Beep:
Under Beep, click on the Enabled check box to enable or disable (a check mark indicates beep is en-
abled).
Long Range Systems 5 Button Butler Program Guide