User's Manual

Long Range Systems 7 Button Butler Program Guide
To set Cancel Message:
1. Click on the Enabled check box to enable or disable (a check mark indicates input is enabled.)
2. Enter a message.
Low Battery Page
This sends a message to the pager to add new batteries.
1. Under Low Battery Page, click on the Enabled check box to enable or disable (a check mark indi-
cates low battery page is enabled).
2. Enter the pager number this will alert.
3. Enter a message. Once set, the function automatically alerts the selected pager when the batter-
ies get low.
Example:
IF: Butler XP with ID of 5 has low batteries
THEN: Pager will display “Low Battery 5”
Repaging
This feature will enable or disable the re-paging feature. When the “Service” button is pressed, the Butler
transmitter will resend the message to the pager (at pre-set time intervals) until the page is cleared.
To set Re-paging:
1. Click on Enabled box to enable or disable (a check mark indicates input is enabled).
2. Enter a Repage time. Must be 10 seconds or more.