User Manual


The Znode is designed to received signals from
LRS 2.4 GHz devices and “retransmit” them.

• Required voltage: 110/120V outlet with
5Vdc power supply.
• Operating Frequency:
2.4GHz to 2.475GHz
• Transmit Power: 100 mw
• Transmit Range: 300’

• Znode
• 5VDC Power Supply
• 2.4 GHz Antenna

The antenna should be placed on the SMA connector on the Znode and tightened into
place (see picture)

 $#
• Metal surfaces and thick walls will reduce the signal strength.
The Znode operates at its best when installed at the “fringe” of your area. This means
you should get it as far from the T750x transmitter or WIN application as possible but
still be able to communicate with the T750x or WIN application.
1. Set T750X or WIN application into Associate Mode.
2. Connect the 5VDC power supply into the Znode.
Long Range Systems 1 Znode User Instructions
Znode
USER INSTRUCTIONS