User Manual
3. Press the button on the side of the Znode once.
4. The LED will begin to flash. The green LEDs will flash to show that the Znode con-
nected to the T750X or WIN application.
5. The green LED will flash once every 5 seconds to show it is connected.
$$ # $ $"!$$!" ##
"## $
1. Press and hold the button on the side of the Znode for 5 seconds.
2. The LED will now be RED.
3. Put the T750x or WIN application into Associate mode.
4. Press the button on the side of the Znode once.
My LED is displaying RED all the time?
The Znode is currently waiting to be associated to a T750x or WIN application. Make
sure the T750x or WIN application is in Associate Mode, then press the button on the
side of the Znode once.
Should you have any questions, please contact us:
LRS Customer Service Department
800.437.4996 or 214.553.5308
LRS Australia LRS Brazil LRS Canada LRS Colombia
+61 (02) 995 5700 5511 41528416 877.607.7243 (+57) 1 - 7592452
www.lrsaustralia.com.au www.lrspager.com.br www.lrscanada.ca www.lrscolombia.com
LRS Europe GmbH LRS Middle East Ltd LRS South Africa LRS United Kingdom
+49 531 310542 0 +9613 81 82 84 +27 21 422 4975 +44(0)1782 537000
www.lrs.eu.com www.lrs-lb.com www.lrssa.com www.lrspagers.co.uk
WARRANTY
Any rechargeable pager left off charge for more than 30 days is not covered under the
standard warranty.
FCC ID: M74TX-ZNODE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
Long Range Systems 2 Znode User Instructions