User's Manual
• Prg All Page [0]911
• Prg System [0]0
• Group [1] 1
• Group [2] 2
9. Return the Pager to the Charger when done (If rechargeable).
10. Repeat steps 2 through 8 for the remaining Pagers.
11. When finished, remove Pagers from the Charger and Page each one.
12. Reprogram any Pagers that Do Not Page.
Alpha Encryption
• Only LRS Alpha pagers can be encrypted and be programmed from the transmitter
• Encryption does not change the pager numbering
1. Press Setup.
2. Enter Access Code.
3. Press the F2 (DN) until the display shows 2: Encryption.
4. Press 2 (2: Encryption).
5. Select:
1 (1: On/Set) to enable encryption and set new encryption key
• Enter 16 double digits (Note: all ff will disable the key)
(Example: 11:12:13:44:11:11:11:11:11:11:11:11:11:11:11:11)
• Press ENTER when finished with each line.
• Follow instructions on display.
• Turn the pager off then on.
• When it stops vibrating, press ENTER (note more than 1 pager can be encrypted at once).
• Screen will display “Transmitting Key”.
• Pager will beep once and display “Pgr Encryption 128-bit”.
2 (2: Off) to disable encryption
• The display shows “Transmit Key Now?” press the F1 (YES) key to send or F4 (NO).
• Follow instructions on display.
• Turn the pager off then on .
• When it stops vibrating, press ENTER.
• Screen will display “Transmitting Key”.
• Pager will beep once and display “Pgr Encryption None”.
3 (3: Transmit Key) to send the current encryption key to pagers.
• Follow instructions on display.
• Turn the pager off then on.
• When it stops vibrating, press ENTER.
1:On/Set
2:Off
3.TransmitKey
Long Range Systems 25 T7400A User Manual