User's Manual

Cleaning & Charging Instructions For LRS Paging Equipment
Cleaning:
L
RS pagers are made from industrial-strength, polycarbonate material. However, this material is sus-
ceptible to hairline cracking if non-approved cleaners are used. When cleaning LRS pagers, we recom-
mend only using ISOPROPYL ALCOHOL-BASED CLEANERS.
To clean the equipment:
1. Take a clean rag and an isopropyl-alcohol based cleaner.
2. Soak the clean rag with the isopropyl alcohol cleaner.
3. Wipe down the pagers or equipment.
Cleaning equipment with any other non-approved cleaners can weaken plastic and cause hairline cracks.
Pagers and equipment that are cleaned with unapproved cleaners and suffer cracking will not be covered
under warranty.
Do not submerge any LRS paging equipment in any type of liquid as this will also damage the equipment
and is not covered under the standard warranty.
Charging:
Place rechargeable pagers on the charger and let them charge for 8 hours prior to first use.
Rechargeable pagers should be kept on charge even during extremely long periods of inactivity.
Only 10 VAC power supplies should be used with LRS chargers and transmitters. DC power supplies will
cause damage to equipment that is not covered under the standard warranty.
Should you have any questions, please contact the LRS Customer Service Department at 800.437.4996,
214.553.5308 or your local LRS dealer.
LRS Australia LRS Brazil LRS Canada LRS Colombia
[phone] 41528416 877.607.7243 (+57) 1 - 7592452
www.lrsaustralia.com.au www.lrspager.com.br www.lrscanada.ca www.lrscolombia.com
LRS Europe GmbH LRS Middle East Ltd LRS South Africa LRS United Kingdom
[phone] [phone] [phone] [phone]
www.lrs.eu.com www.lrs-lb.com www.lrssa.com www.lrspagers.co.uk
Long Range Systems 35 T7400A User Manual