T9560 Multitouch Paging System Transmitter U S E R M A N UA L T9560 MT M1 M2 M3 CLR SEND M4 M5 G PROG M6 www.pager.net Usage, Installation, Warranty and Service Information Long Range Systems, LLC 4550 Excel Parkway, Suite 200 Addison, TX 75001 800.437.4996 • www.pager.
Table Of Contents Long Range Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Keypad Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Paging Your Pager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Message to Your Pager . . . . . . . .
Long Range Systems Thank you for choosing Long Range Systems to provide your on-premise paging solution. We provide cutting edge products and first-rate service to satisfy your needs for years to come. Please familiarize yourself and your staff with the contents of this instruction in order to properly operate and maintain your system.
Paging Your Pager The T9560 will page single pagers numbered from 1-799. To page a pager, press the pager number followed by a message key. Example: To page pager #22 with Message 1, press 2-2-M1. Message 1-6 - message key. Default message - send key. Alternatively, you can press the pager number and send to immediately send a page but only using the defaulted message 1. Example: To page pager #22, press 2-2-Send To use the All Page, press 9-1-1. This will immediately send a page to all pagers.
SP4 Staff Paging Mode M1 – Vibe 1 Time, LED 1 lights M2 – Vibe 2 Times, LED 2 lights M3 – Vibe 3 Times, LED 3 lights M4 – Vibe/Beep 1 Time, LED 1 lights M5 – Vibe/Beep 2 Times, LED 2 lights M6 – Vibe/Beep 3 Times, LED 2 lights Configuring Your Messages The POCSAG Staff and 3 Digit Pager message can be edited and changed to a user defined set of messages. Please refer to LRS Programmer instructions for changing messages. System ID To change the System ID, press 9-0-x-Prog (x = sys ID from 0 to 49).
3) Press into the keypad a number from 1-799 and press PROG. (Example: For Pager #200, press 20-0-PROG) 4) The red LED on the top right corner of the transmitter will light up three times. 5) The pager will beep three times to indicate the single pager capcode, all page capcode, and system ID. Group Paging and Programming The T9560 has the ability to program groups into the LRS POCSAG Staff and 3 Digit Pagers. Up to 5 groups can be programmed into the transmitter and pager.
Cleaning & Charging Instructions For LRS Paging Equipment Cleaning: LRS pagers are made from industrial-strength, polycarbonate material. However, this material is susceptible to hairline cracking if non-approved cleaners are used. When cleaning LRS pagers, we recommend only using ISOPROPYL ALCOHOL-BASED CLEANERS. To clean the equipment: 1. Take a clean rag and an isopropyl-alcohol based cleaner 2. Soak the clean rag with the isopropyl alcohol cleaner 3. Wipe down the pagers or equipment.
Troubleshooting Transmitter Unit Transmitter Display does not light when a key is pressed • The proper power supply for this transmitter is 12VDC 2.
Service Questions and Answers Should your paging system ever fail or should you need additional paging supplies, please call Long Range Systems at (800) 437-4996. Our office is open Monday through Friday 8:30 am to 5:00 pm Central Standard Time. For weekend or evening emergencies: Long Range Systems has 24/7 live Technical Support available via (800) 437-4996.
Warranty Long Range Systems, LLC permits a one-year manufacturer’s warranty following the original consumer purchase date of any LRS system. Any individual components or products purchased will receive a 30-day manufacture warranty. This warranty covers any defects due to faulty material or workmanship, but does not include damage to the product resulting from accident, misuse or improper electrical connection.