Operator's Manual Owner manual

PRECAUTION FOR BATTERY AND CHARGER

CHARGE BATTERY AT LEAST 1 HOUR before initial use.

1. CHARGE AT ROOM TEMPERATURE. Room temperature must be higher

than 32°F and lower than 122°F.

2. DO NOT CHARGE IF THE CHARGER’S CORD OR PLUG IS DAMAGED.

Charging with a damaged cord may result in a fire or electrical shock. If the

charger is damaged in any way, have it repaired by a qualified serviceman.

3. DO NOT SHORT ACROSS TERMINALS OF BATTERY. Take care that

metal such as paper clips, nails, the sides of a metal tool box do not cause

a short in your battery. Extremely high temperatures and fire can result.

4. DO NOT INCINERATE THE BATTERY.

WARNING! The warnings, cautions, and instructions detailed in this manual cannot

cover all possible conditions and situations that occur.

USE COMMON SENSE AND CAUTION WHEN OPERATING THE TOOL.

SPECIFICATIONS

Voltage: 24 volts DC

Variable Speed 0-2000 RPM

Impact Frequency: 0-4000 IPM

Max Torque: 300 FT LBS

Reversible / Electric Brake

Chuck: 1/2” Square Driver

Includes:

1 pc 24V wrench

1 pc 1 hour CUL & UL approved charger

2 pcs 24V Ni-Cd rechargeable battery

1 pc carrying case

1 pc 1” deep socket

1 pc 3” extension

1 pc 5” extension

FUNCTION DESCRIPTION

1. 1/2” Square Socket Drive

2. Metal Gear Housing

3. Heavy Duty Motor #977

4. Direction Lever (Forward / Stop / Reverse)

5. Variable Speed Trigger Switch

6. Rubber Hand Grip

7. Battery Release Button

8. Rubber Protected Battery Pack

9. LED Working Light

10. LED Light Button

11. Battery Indicator light

12. Battery Indicator Button

13. Charger