Installation Instructions

www.longer3d.com [e-mail]
20
You can complete the selection of engraving/cutting graphics by ①importing computer
pictures or files/②making graphics on the drawings.
①When importing computer pictures or files, affected by the file format, change the
supported format to "all supported items" to find the imported content.
②Make graphics on the drawing, you can use the graphics editing function on the left to make
any pattern on the drawing
Step3. After loading the graphics, set the name, speed, maximum power, mode and other
parameters in the cutting/layer; (engraving function and cutting function are only different in
speed, power parameter selection and focusing, and the cutting speed parameter is slower)