Installation Instructions

www.longer3d.com [e-mail]
29
Question 3:
When the machine returns the filament, it can't be returned.
What should I do when stuck in the pneumatic joint?
1. Before returning the material, please heat
the nozzle first, and then withdraw the
consumables as soon as possible. If you can't
pump it, you can re-feed the material with the
advanced material, and melt the extruded
block formed at the end of the consumable in
the nozzle.
2. When withdrawing the
consumables, before the end of
the consumables reaches the
pneumatic joint, we will usually
pull the Teflon directly from the
Teflon and cut the end of the
consumables.