Installation Instructions

www.longer3d.com [e-mail]
4
3) We strongly recommend placing the machine in a well-ventilated
room, and at the same time, the door of the room has a sealing
effect and the windows have curtains, so as to effectively avoid
looking directly at the laser beam and some smoke and steam ,
Particles and other highly toxic substances. At the same time, you
can pay attention to the Longer products (cover) in the follow-up.
4) The high-energy diode laser beam can produce
extremely high temperatures and significant amounts
of heat as the substrate material is burned away while
engraving and cutting. Some materials are prone to catch fire
during cutting operations creating
flame, fumes and smoke.
Although the RAY5 has a built in flame sensor, this technology
should NOT be considered 100% accurate and should be seen only
as a warning system.
P.S. During the working process of RAY5, if a flame is
found, the machine will stop the laser and make a sound
to indicate abnormal conditions. Please pay attention to the
working status of the machine.
6) during operation to ensure that any flare ups/ flame are properly
contained and
extinguished.