Operating Manual For FORCECUT 40D 40AMP Plasma Cutter 110v/220v
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Table of Contents: PG. 3: Thank you From LONGEVITY PG. 4-6: Warranty/Shipping Damage/Order Information PG 7: General Description PG. 8-9: Warning and Safety Information PG. 10: Safety Tips PG. 11: Technical Data/ Specifications PG. 12: Front Panel PG. 13: Basic Installation PG. 14-15: Basic Operation PG. 16: Troubleshooting PG.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v THANK YOU! We, at LONGEVITY, want to thank you for purchasing our product. You are almost ready to experience Longevity Welding first hand. Longevity definitely appreciates your business and understand that this equipment may be overwhelming to setup and operate so we have prepared a manual that will assist you in understand your new plasma cutter/welder.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Longevity Global, Inc. 23591 Foley St Hayward, CA 94545 Toll-Free Customer Support: 1-877-LONG-INC / 1-877-566-4462 Website: www.longevity-inc.com Sales: sales@longevity-inc.com Customer Service: help@longevity-inc.com Dealers: dealers@longevity-inc.com Complaints: complaints@longevity-inc.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Warranty LONGEVITY Plasma Cutters, Welders, and Multi-Purpose Welders are covered for specific Parts and Labor warranty at our facility. For detailed information regarding your specific LONGEVITY welder or cutter, please view our Terms and Policies page on our website at the following website link: http://www.longevity-inc.com/terms/ . Shipping Damage Your machine is insured against damage during shipping.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v In Warranty Service Customers, who own machines that are in warranty and require service, should contact our Warranty Department by email at help@longevity-inc.com to obtain a return authorization code. In addition to the warranty we offer, we would like for you to register your product on our website at www.longevity-inc.com/resources. Remember, warranty starts from the date of purchase.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v General Description: The FORCECUT Series plasma cutters offer a revolutionary new approach to plasma cutting technology. LONGEVITY® plasma cutters use the newest technology available in the welding industry with the help of IGBT internal components. By producing the units with inverter technology, we are able to produce smaller and more efficient units.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Warnings and Safety Welding and plasma cutting may be dangerous to the operator and to bystanders, if the equipment is not operated properly. Welding or cutting must be performed in accordance with all relevant safety regulations. Carefully read and understand this instruction manual before installing and operating this equipment. Changing function modes during welding may damage equipment. Before welding, disconnect the electrode-holder cable from the equipment.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Welding splash is a fire hazard. Keep flammable material away from the work place. Keep a fire extinguisher nearby, and have all personnel trained in its use. Surface noise generated while welding or cutting can be harmful to hearing. In the event of a machine fault. Refer to this instruction manual. If the fault cannot be determined, contact your local dealer or supplier for assistance.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Safety Tips Consider the following tips to ensure safe operation of your welding/cutting equipment: Ensure that this welding equipment is installed in an area free of corrosive chemical gases, flammable gases or materials, and explosive chemicals. The area should contain little dust, and have a humidity of no more than 80%. Operate the welding equipment in an area sheltered from direct sunlight and precipitation.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v MAIN TECHNICAL DATA Data FORCECUT 40D Item Power voltage (v) 1 phase 110V±10% Frequency (Hz) 1 phase 220V±10% 50/60 No-load voltage (v) 370-405 Rated input current (A) 47.9 29.9 Rated output voltage (v) 93.2 96 Output current regulation (A) 14-33 14-40 Duty cycle 60% Efficiency 80 Power factor Pilot arc model 0.73 Low Frequency Pilot Arc Burner inter diameter (mm) 1.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Front Panel 12 | P a g e
FORCECUT 40- 40 AMP Plasma cutter 110v/220v The panel picture above is for reference only. If any difference with the real machine, please follow with the real machine.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Check Prior to Use 1. Check if cutting machine is grounded securely according to standard. 2. Check if all connectors are connected firmly. 3. Check if power voltage is correct. Basic Operation 1. Ensure that all cables are connected to the machine. 2. Ensure that the machine’s OFF/ON switch is set to OFF, and plug the machine into the electrical outlet. 3. Connect the air compressor supply line to the air input side on the water separator. 4.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Operation environment 1. The cutting machine can perform in an environment where conditions are particularly harsh and with outside temperature between –10 and +40 degrees centigrade with a dampness level of max 80%. 2. Avoid using in sunshine and dropping environment. 3. Keep machine dry and avoid water in the machine. 4. Do not use the cutting machine in an environment where conditions are polluted with high concentrations of dust or corrosive gas in the air.
FORCECUT 40- 40 AMP Plasma cutter 110v/220v Trouble shooting If your unit is not properly functioning, please call us immediately toll free at 1-877-566-4462 for support. We have included a small table here to diagnose most common problems. Problems, Causes, and Solutions Problems Machine will not turn on. The machine runs, but nothing is happening Consumables (tips) are being consumed Heavy Underside Slag (Cutting) Poor Cut Quality Inconsistent Arc Plasma Cutter Pilot Does not Ignite O.C.
LONGEVITY® Global, Inc. thanks you for your purchase and the opportunity to be able to serve you. If, after reviewing this manual, you have any problems in setting up or operating your machine, contact us at help@longevity-inc.com. LONGEVITY® Global, Inc. Toll-Free 1-877-LONG-INC / 1-877-566-4462 Website: www.longevity-inc.com Sales: sales@longevity-inc.com Customer Service: help@longevity-inc.com Dealers: dealers@longevity-inc.
