Parts Int the Box Remote-Controller x 1 Battery x £ pieces Power Adapter x 1 Instruction Manual x 1 Motor Mut x 2 pairs CCW Propeller x { pairs, CW Propeller x 1 pairs Sticker Sheet x 1 .
INTRODUCTION + The structure of the main platform uses ultra-high tensile PC materials, which are highly pliable and durable a5 well 3s ultra-high impact resistance. + The new integrated design increases the structural strength of the product, Af the same time, the system 's expendable for upgrades, maintenance and part replacements.
2. PRODUCT PARAMETERS « Drone Para: ers Propeller. 6040 Body (Lx Wx Hj: 202 x 2% x 82mm Weight: 398g (with battery and propellers) Remote Controller. L-6 Receiver: OLYMPIAS 82mm Flight Controller: LY-CC30 Ma inboard: L-250 ma inboard (with 4 Electronic Speed Controllers and BE Battery: 2 x Liston Flight Duration: MAX 15 min « Camera Parameters Resolution: 420th. System Mode: PASCAL Output Channel 3.
5. SYSTEM ASSEMBLY Install the propeller in the direction of rotation Erection af the towards the miter as indicated by the arrow on the hone’ read side of the drone's motor as well as in the direction of the arrow an the properer (ite arrow indicated on the progenitor represents the direction for tightening the screw, which is apposite of the propellers comet direction).
« Unpacking and Lacking the Motor 1) Unlocking the Motor Push the throttle rod on the remote controller to the bottom inner position (farthest right come), and waft a few seconds to unfrock the mortar. (2) Locking the Motor Push the throttle rod to the lowest position and wait 10 seconds to lack the motor. The motor will not run. you push the throttle upwards 7.
+ Owing the Mas [an Etna 9 System ~UP/DOWN-> Model name UP or DOWN 1 change the letter, Press OK to confirm and move to the text letter. Press and hold CANCEL key to confirm and return to the system menu SYSTEM. « Flying Forward ard Reversing + Type Selection Jen Type Select — =p secrete) Model 21 3 Ales System stem ~UP/DOWN-> Type select UP or OWN to point the > cursor to Hairpin. Press and ho'd CANE: key to confirm and return to the system menu SYSTEM.
suction ef LYE-250 Char LED Status Caricature Light Toner put abt Battery Compartment « Role for he LYE-250 Charger (1) The charger car only be used 10 charge Lithium-ion Patisseries, otherwise the charger or the batteries might be damaged. (7) When charging, the charger must be placed at a dry and well-ventilated location and away from sources of heat as well a¢ flammables and explosive items { 3) The charging process must be supervised tc prevent any accidents.
» Brush less Motor Schematic Diagram{ indicates the direction of the drone's head | t Brutishness Motor Brush less Motor Brutishness Motor Brutishness Marat + flight Mode Path th main sch C0 Pu the meal ich $4) Post ion, was the ses eng Post ion 2, sens ve sk it winch he menial Th rightmost od. Disclaimer fully before using the product.