PCI I/O Card DUAL UART User Manual Ver. 1.10 All brand names and trademarks are properties of their respective owners.
Overview This PCI I/O card is a dual UART with 1284 printer interface port controller with PCI bus interface and uses an all-in-one solution from NeMos Technology, which provides superior performance and unmatched data transfer rates. The most advanced feature is it uses of a single interrupt, which is set automatically by the host system and share among all on-board I/O ports and supports printer interface as well as PS2, EPP & ECP modes.
2. The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O Card”. Click the “Next” button. 3. Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the driver. 4. Insert the driver CD in CD-ROM drive (D) and click 5. on the “Browse” button. Windows 98/95/2000 will automatically locate the driver in the driver diskette. Click the “OK” button to continue. . 6. Click on the finish button to start copying files from driver diskette.
7. Windows 98/95/2000 will automatically restart in order to update the hardware configuration. . 8. Once Windows 98/95/2000 has restarted, you can now connect your external devices to the PCI I/O card. To install the driver for the external devices, please refer to the external device user’s manual. . Windows NT 4.0 Make sure Windows NT 4.0 is properly installed into your system first. 1. Start Windows NT. 2. Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive. 3.
