PCIe Serial Card 2 Ports User Manual Ver. 1.00 All brand names and trademarks are properties of their Respective owners.
Features and Benefits z Compliant with PCI Express Base spec 1.1 z Compliant with PCI Power Management 1.
Board Layout Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot. 4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord. Driver Installation For Windows® 2000 1. Insert the Driver CD into the CD-ROM drive. 2. At the Found New Hardware Wizard, click Next. 3.
1. Insert the Driver CD into the CD-ROM drive. 2. At the Found New Hardware Wizard, select Install the software automatically (Recommended), then click Next. 3. Accept the default entry, then click Next. 4. Click Finish to complete the driver installation. For Windows® XP-x64/Server 2003-x64 1. Insert the Driver CD into the CD-ROM drive. 2. At the Found New Hardware Wizard, select Install the software automatically (Recommended), then click Next. 3.
To Verify Windows® Driver Installation Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. You should see two PCI Express UART Port … installed under Ports (COM & LPT) item, and one PCI Express Multiport Serial Adapter installed under Multi-port serial adapters item.