User`s manual

- 10 -
‧ If you decide to use IP address from Wireless Router, select “Obtain an IP address
automatically”.
‧ If you decide to use the IP address you are desired, select “Use the following IP address”.
Make sure enter correct addresses in “IP Address” and “Subnet Mask” fields.
‧ You must set Wireless Router’s IP address as “Default Gateway”.
‧ If the DNS Server fields are empty, select “Use the following DNS server addresses” and
enter the DNS address is provided by your ISP, then click “OK”.
Checking TCP/IP Settings for Windows Vista
a) Click “Start” Æ “Control Panel Æ “Manage Network Connections” and right click “Local Area
Connection” then select “Properties”, window below will appear.
b) Select “Internet Protocol (TCP/IP)” then click “Properties”, window below will appear.