User`s manual

- 12 -
3. Setup Broadband Router Configurations via Web Browser
The Broadband Router comes with a web-based configuration utility. Users can access this configuration
utility from any of client system within Broadband Router’s LAN. For best results, either use Microsoft
Internet Explorer 6.0 or later.
Before you start configuring your Broadband Router, you have to get following information from your ISP:
a) Has your ISP assigned you a static IP address, or they will assign one to you dynamically? If you
have received a static IP address, what is it?
b) Does your ISP use PPPoE? If so, what is your PPPoE username and password?
If you are not sure of above questions, please contact your ISP.
3.1 Start your Web Browser
To use the Web-Based Utility, you have to launch your Internet Browser (MS IE 6.0 or later).
Step1: Enter Broadband Router default IP address http://192.168.0.1
in the Address field then hit Enter
key:
Step2: Login dialog box will appear, enter admin as User Name and default password is admin, then click
“OK” to login web-based utility.