User`s manual

- 15 -
3.3.2 System Settings
The System Settings window configures broadband router basic settings, such as router’s Host Name, Set
Time Zone, Daylight Saving and Operation Mode.
NTP Server (IP or Domain Name): Enter a Domain Name if it was provided by the ISP
Time Zone: Select the time zone of the country you are currently in. The router will set its time based on
your selection.
Daylight Saving: The router can also take Daylight savings into account. If you wish to use this function,
you must check/tick the enable box to enable your daylight saving configuration.
Host Name: Enter a hostname if it was provided by the ISP (Default: router).
NAPT: You can select to enable NAPT function.
3.3.3 Firmware Upgrade
User uses the Firmware Upgrade window to locate the new firmware then upgrade the system firmware.
Click Browse… to search for the new firmware location, and then click OK to precede the upgrade.