User`s manual

- 6 -

LED Light Status Description

On (Steady Green) Broadband Router is powered on. PWR

Off No power

On (Steady Green) WAN port is successfully connected WAN

Link/ACT

Flashing Data is being sent or received.

On (Steady Green) WAN port is successfully connected to

100Mbps

WAN

100Mbps

Off WAN port is successfully connected to

10Mbps

On (Steady Green) System is hung. STATUS

Flashing Broadband Router is up and ready.

On (Steady Green) LAN port is successfully connected. LAN

(1, 2, 3, 4)

Flashing Data is being sent or received.

On (Steady Green) When push the reset button on rear panel Reset

Off When release the reset button on rear panel

Back Panel Connectors

Button/port Description

Reset Reset configurations to default. Press the button and hold for 10

seconds.

1x, 2x, 3x, 4x LAN Ports. Connect LAN systems with RJ-45 cable.

WAN WAN port. Connect DSL or Cable modem.

PWR Power jack. Connect with AC power adapter.

1.4 System Requirements

● One or more PCs (desktop or notebook) with Ethernet interface.

● TCP/IP protocol must be installed on all PCs.

● Have valid Internet Access account and a DSL or cable modem.

● 10/100BaseT network cables with RJ-45 connectors.

● System with MS Internet Explorer ver. 6.0 or later.