User`s manual

- 7 -
2. PC Configuration ____
User needs to configure TCP/IP network settings, Internet access configuration for each system within the
Broadband Router’s LAN network. By default, the Broadbnad Router acts as a DHCP server for server
version of Windows, it automatically assigns IP address to each system when systems boot up. For all
non-server version of Windows, the default TCP/IP setting acts as a DHCP client. If user chooses fixed
IP addresses for client systems, the Gateway of the client system must be set to the IP address of the
Broadband Router and DNS of the client system should be set to the address provided by your ISP.
2.1 TCP/IP Networking
Checking TCP/IP Settings for Windows 2000
a) Select “Start Æ Control Panel Æ Network and Dial-up Connection” and right click “Local Area
Connection” then click “Properties”,
b) Select the “Internet Protocol (TCP/IP)” for the network card on your system, then click
“Properties”, window below will appear.