CAUTION: You must read this before you proceed. Please look in the Seat Panel for hardware packs. LEFT CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Description Qty A Backrest Panel 1 B Right Arm Panel(With Preinstalled Levellers) 1 C Left Arm Panel(With Preinstalled Levellers) 1 D Seat Panel 1 E Support Bar 1 F Seat Cushion 1 G Left Back Cushion 1 H Back Cushion 1 Description Qty ① Bolt (M6x35mm) 7 ② Screw (M6x45mm) 5 ③ Allen Key 1 No. No.
Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished. OVERVIEW Backrest Panel (A) Back Cushion (H) Seat Cushion (F) Left Arm Panel (C) Right Arm Panel (B) Support Bar (E) Seat Panel (D) Left Back Cushion (G) FRONT FACING This Left Chair has multiple parts and may require up to 30 minutes to assemble.
Step 2 Step 2.2 Step 2.1 Place the Left Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Step 2.1: Align the dowels of Support Bar (E) into the positions in the Left Arm Panel (C) as shown above. Then, affix Support Bar (E) with Left Arm Panel (C) by using Bolt (①) and Allen Key (③). Step 2.2: Attach the Backrest Panel (A) onto Left Arm Panel (C) by using Bolts (①) and Allen Key (③) as shown above. DO NOT FULLY TIGHTHEN BOLTS.
Step 4 A B With the help of your adult partner,place the assembled in Step 3 right side up as shown above. By hand, hold Right Arm Panel (B) and Backrest Panel (A) together tightly then secure the Right Arm Panel (B) and Backrest Panel (A) by using Bolts (①) and Allen Key (③) as shown above.
Step 5 Attach the Seat Panel (D) into the Chair as shown in picture above. Affix Seat Panel (D) to the Chair by using Screws (②) and Allen Key (③). Note: Using Screws (②) from inside to outside of Seat Panel (D) DO NOT FULLY TIGHTHEN SCREWS. Step 6 Adjust Pre-installed Levellers height for balance Inspect the Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints.
Step 7 Turn the Chair right side up. Place Seat Cushion (F), Left Back Cushion (G) and Back Cushion (H) to Seat Panel (D). Inspect it and make sure all parts are adequately connected. Ensure all screws, bolts are fully locked into position and secured. The Chair is ready to be used. Caution: This Chair can only be used on a flat, level surface.
of 8