Installation & Assembly

Step 6
Inspect the Chair and make sure all parts are adequately connected.
In a sequential manner, tighten all Screws and Bolts at all joints.
With assistance from your adult partners, adjust the Levellers to desired height to
avoid wobbles.
Attach the Seat Panel (D) into the Chair as shown in picture above.
Affix Seat Panel (D) to the Chair by using Screws (②) and Allen Key (③).
Note: Using Screws (②) from inside to outside of Seat Panel (D)
DO NOT FULLY TIGHTHEN SCREWS.
Step 5
Adjust Pre-installed Levellers height
for balance
6 of 8