Longsung-A9500-NB-IoT-Module-User-Manual-V2-3576207

A9500 user manual Page 16 of 37
2) The USB data cable B terminal is accessed to the J0701 interface on the lower left corner of the EVB
board, as shown in the following figure:
Figure 7：USB port connection view
3) Insert the USB data cable A terminal into the USB interface of the PC.
3.1.5. How to connect the UART port
According to following steps to connect the UART port:
1) Place the EVB board face up;
2) The USB data cable B terminal is accessed to the J0702 interface on the lower left corner of EVB
board, as shown in the following figure: