Operating Instructions

Toyota smart key：

Product

Features:

1、Working

voltage:

CR2032

3.0V

2、Frequency

range:

312mHZ

3、Working

range:

meters

4、Power

consumption:

≤

0.024mW

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety should always be followed.

Read and familiarity yourself with all operating instructions before using your

Before using your Toyota smart key, visually check that the unit is intact and

has not suffered any transit damage.

Never allow children to play with the Toyota smart key. Small parts may be a choking hazard.

Do not use these headphones for anything other than its intended use.

Do not immerse the Toyota smart key in water or any other liquids.

Do not expose the Toyota smart key to moisture, rain or humidity, as it is not waterproof.

Never clean the Toyota smart key with solvents or harsh or abrasive cleaners.

Do not attempt to dismantle the Toyota smart key, it does not contain any user serviceable parts.

Whilst not in use, store the Toyota smart key in a cool dry place free from extreme temperatures,

humidity or dust.

Operation

1. Our Toyota Smart Key currently only supports ID8A chips, and does not support 4D.

2. Please install the battery of CR2032 before use and make sure the battery is fully charged.

3. Toyota smart card can be matched with the corresponding car by using the car matching

device.

4. After matching the car, it can achieve the same function as the original car key.

5. Toyota smart card model can be selected by judging frequency and P4 page information.

PAGE 1
Toyota smart key： Product Features: 1、Working voltage: CR2032 3.0V 2、Frequency range: 312mHZ 3、Working range: 40 meters 4、Power consumption: ≤ 0.024mW IMPORTANT SAFEGUARDS When using electrical appliances, basic safety should always be followed. Read and familiarity yourself with all operating instructions before using your Before using your Toyota smart key, visually check that the unit is intact and has not suffered any transit damage. Never allow children to play with the Toyota smart key.
PAGE 2
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
PAGE 3
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.