Caution: You must read this before you proceed.
Part NO.
Before Beginning Assembly: This Table has multiple parts and may require up to 20 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various Table parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly.
Step 1 B. Table Leg (Left) A. Table TOP C. Table Leg (Right) D.Table Short Support Rail E. Table Long Support Rail Place the Table Top (A)&Table Left Leg (B)&Table Right Leg(C) on a soft surface to avoid any scratches or damages to the product. REMOVE the Table Top Cover from the underside of the Table Top (A), take out Table short rail(D) &Table long rail(E) and hardware.
Step 3 Attach Table left leg(B) and Table Right Leg(C) to Table top (A),using Flat washer Ring(H),Spring washer Ring(I) and JCBC bolt(G),Tighten JCBC bolt with Allen Key(J) Caution : At this stage, LOOSELY FASTEN these bolts Step 4 Prepare the other side of assembled Table Left Leg(B)&Table Right (C)&Table short supprt Rail(D), Attach Table left leg(B) and Table Right Leg(C) to Table top (A),using Flat washer Ring(H),Spring washer Ring(I) and JCBC bolt(G),Tighten JCBC bolt with Allen Key(J) Caution : At t
Step 5 Attach Table long support rail ( E ) to both side of Table short support Rail using screw(J). Tighten all the screws and bolts. Step 6 Adhere the Foam Pad(L) under the Legs(B & C). Step 7 Stand the Table rightside up. Your Table is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth. Children should not climb or jump on the furniture.
Caution: You must read this before you proceed.
Part NO.
Before Beginning Assembly: This Stool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Stool parts, the above picture is to help you put the various Stool parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly.
Step 1 B. Leg Frame A. Stool Seat B. Leg Frame C. Stool Rail Place the Stool Seat(A)&Leg Frames(B)&Stool Rail(C) on a clean, non-marring surface. Remove the Seat Base Cover from the underside of the Chair Seat(A) and take out all of the Parts and Hardware. Step 2 Put the Stool Seat(A) onto a flat table top-like surface at waist height. Slide the Leg Frame(B) into the bottom Stool Seat dowls.
Step 3 Insert Stool Rail(C) into the Leg Frame(B) as shown above. Then, attach using Screw(D) with Allen Key(F). Caution : At this stage, LOOSELY FASTEN these bolts Step 4 Slide the Leg Frame(B) into the bottom of Stool Seat dowls and Stool Rails(C). Secure using Screws with Allen Key(F). Tighten all the screws and bolts.
Step 5 Adhere the Foam Pads(G) under the Legs. Tighten all the screws and bolts. Step 6 Turn over the stool, Insert Wood Button(E) into every screw hole in the Stool. Your Stools are ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth. Children should not climb or jump on the furniture.
Caution: You must read this before you proceed.
Part NO.
This Bench has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various Bench parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly.
Step 1 B. Leg Frame A. Bench Seat B. Leg Frame C. Bench Rail Place the Bench Seat(A)& Leg Frames(B)&Bench Rail(C) on a clean, non-marring surface. Remove the Seat Base Cover from the underside of the Bench Seat(A) and take out all of the Parts and Hardware.
Put the Bench Seat(A) onto a flat table top. Slide the Leg Frame(B) into the bottom Bench Seat dowls. Align and attach Leg Frame using Screws(D) with Allen Key(F) Caution : At this stage, LOOSELY FASTEN these bolts Step 3 Insert Bench Rail(C) into the Leg Frame(B) as shown above. Then, attach using Screw(D) with Allen Key(F). Caution : At this stage, LOOSELY FASTEN these bolts Step 3 Slide the Leg Frame(B) into the bottom of Bench Seat dowls and Bench Rails(C).
Step 4 Adhere the Foam Pads(G) under the Legs. Step 5 Stand the Stool rightside up. Insert the wood button(E) into the leg support raill screw Hole Your Spindle Back Chair is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth. Children should not climb or jump on the furniture.