User's Manual

Network Type : There are two types, infrastructure and 802.11 Ad-hoc mode. Under Ad- hoc
mode, user can also choose the preamble type, the available preamble type includes auto and long. In
addition to that, the channel field will be available for setup in Ad-hoc mode.
RTS Threshold : User can adjust the RTS threshold number by sliding the bar or key in the value
directly. The default value is 2347.
Fragment Threshold : User can adjust the Fragment threshold number by sliding the bar or key in
the value directly. The default value is 2346.
Channel : Only available for setting under Ad-hoc mode. User can choose the channel frequency to
start their Ad-hoc network.
Authentication Type : There are 7 type of authentication modes supported by RaUI. They are open,
Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.
Encryption Type : For open and shared authentication mode, the selection of encryption type are
None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the encryption
type supports both TKIP and AES.
- 29 -
802.1x Setting : This is introduced in the topic of "Section 3-2 : 802.1x Setting".
WPA Pre-shared Key : This is the shared secret between AP and STA. For WPA-PSK and
WPA2-PSK authentication mode, this field must be filled with character longer than 8 and less than
32 length.
WEP Key : Only valid when using WEP encryption algorithm. The key must matched AP's key.
There are several formats to enter the keys.
1. Hexadecimal - 40bits : 10 Hex characters.
2. Hexadecimal - 128bits : 26Hex characters.
3. ASCII - 40bits : 5 ASCII characters.
4. ASCII - 128bits : 13 ASCII characters.