User's Manual

Enter "Detail" of the credential and change configurations (SSID, Authentication,
Encryption and Key) manually if need.
If PIN configuration setup, enter Pin Code read from your Enrollee.
- 75 -
Start PIN or PBC. The following procedures are as similar as section 2-7-3(PIN Enrollee
Setup) or
section 2-7-4(PBC Enrollee Setup),
If your AP Enrollee has been configured before WPS process, the credential you set in advance
will be updated to AP itself. Otherwise, after a successful registration, the AP Enrollee will be re-
configured with the new parameters, and STA Registrar will connect to
the AP Enrollee with these new parameters.