User's Manual

Utility Config
-27-
RTS Threshold: User can adjust the RTS threshold number by sliding the bar,
or key in the value directly. The default value is 2347.
Fragment Threshold: User can adjust the Fragment threshold number by
sliding the bar or key in the value directly. The default value is 2346.
Channel: Only available for setting under Ad-hoc mode. Users can choose the
channel frequency to start their Ad-hoc network.
Authentication Type: There are 7 type of authentication modes supported by
RaUI. They are open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-
PSK.
Encryption Type: For open and shared authentication mode, the selection of
available encryption type are None and WEP. For WPA, WPA2, WPA-PSK and
WPA2-PSK authentication mode, both TKIP and AES encryption is available.
802.1x Setting: This is introduced in the topic of "Section 3-2 : 802.1x Setting".
WPA Pre-shared Key: This is the key shared between the AP and STA. For
WPA-PSK and WPA2-PSK authentication mode, this field must be filled with a
key between 8 and 32 characters in length.
WEP Key: Only valid when using WEP encryption algorithms. The key must be
identical to the AP's key. There are several formats to enter the keys.
1. Hexadecimal - 40bits : 10 Hex characters.
2. Hexadecimal - 128bits : 26Hex characters.
3. ASCII - 40bits : 5 ASCII characters.
4. ASCII - 128bits : 13 ASCII characters.
4.2.2.3 Example to Add Profile in Profile
Click "Add" below the Profile List.