User's Manual

-34-

Figure 2-3-1-2 General information about the Access Point

WPS information contains the authentication type, encryption type, config.

methods, device password ID, selected registrar, state, version, AP setup lock

status, UUID-E and RF bands, as shown in Figure 2-3-1-3. The information is further

explained as follows :

Authentication Type: There are three types of authentication modes supported

by RaConfig. They are open, Shared, WPA-PSK and WPA system.

Encryption Type: For open and shared authentication mode, the choices of the

encryption type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-

PSK authentication mode, the encryption type supports both TKIP and AES.

Config Methods: Correspond to the methods the AP supports as an Enrollee

for adding external Registrars, (a bitwise OR of values.)

Value Hardware Interface

0x0001 USBA

(

Flash Drive

)

0x0002 Ethernet

0x0004 Label

0x0008 Dis