User's Manual

Designing Your PCI Adapter
-5-
2 Designing Your PCI Adapter
PCI Adapter supports up to 150Mbps connections. It is fully compliant with the specifications
defined in 802.11n (Draft 2.0) standard.
The status LED indicators of PCI Card are described in the following.
• Lnk/Act ON (Green): Indicates a valid connection.
• Lnk/Act Flashing: Indicates the Adapter is transmitting or receiving data.
3 Installation
3.1 Install Your PCI Adapter
• Open your PC case and locate an available PCI on the motherboard.
• Slide PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's contacts.
You may have to apply a bit of pressure to slide PCI Adapter all the way in. after it is firmly in
place, secure its fastening tab to your PC's chassis with a mounting screw. Then close your PC.
• Attach the external antennas to PCI Adapter's antenna port.
• Power on the PC.
Note:Select Cancel when “Found New Hardware” window appears.