User's Manual

-54-
Figure 2-7-1 WPS function
WPS Configuration: The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple
Configuration) is to simplify the security setup and management of Wi-Fi networks.
Ralink STA supports the configuration and setup using a PIN configuration method
or a PBC configuration method through an internal or external Registrar.
WPS AP List: Displays the information of the surrounding APs with WPS IE from
the last scan result. The detailed information includes the SSID, BSSID, Channel, ID
(Device Password ID), Security-Enabled.
Rescan: Issues a rescan command to the wireless NIC to update information on
the surrounding wireless network.
Information: Displays the information about WPS IE on the selected network. The
detailed list includes the Authentication Type, Encryption Type, Config Methods,
Device Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E
and RF Bands. Further details are available here: WPS Information on AP.
PIN Code: The user is required to enter an 8-digit PIN Code into Registrar. When
an STA is the Enrollee, you can click "Renew" to re-generate a new PIN Code.