User's Manual

Utility Config
-57-
authentication mode, the encryption type supports both TKIP and AES.
Config Methods: Correspond to the methods the AP supports as an Enrollee for
adding external Registrars. (a bitwise OR of values)
Value Hardware Interface
0x0001 USBA
(
Flash Drive
)
0x0002 Ethernet
0x0004 Label
0x0008 Dis
p
la
y
0x0010 External NFC Token
0x0020 Inte
g
rated NFC Token
0x0040 NFC Interface
0x0080 Push Button
0x0100 Ke
yp
ad
Device Password ID: Indicates the method or identifies the specific password that
the selected Registrar intends to use. APs in PBC mode must indicate 0x0004
within two-minute Walk Time.
Value Descri
p
tion
0x0000 Default
(
PIN
)
0x0001 User-s
p
ecified
0x0002 Reke
y
0x0003 Dis
p
la
y
0x0004 PushButton
(
PBC
)
0x0005 Re
g
istrar-s
p
ecified
0x0006-0x000F Reserved
Selected Registrar: Indicates if the user has recently activated a Registrar to add
an Enrollee. The values are "TRUE" and "FALSE".
State: The current configuration state on AP. The values are "Unconfigured" and
"Configured".
Version: WPS specified version.
AP Setup Locked: Indicates if the AP has entered a setup locked state.
UUID-E: The universally unique identifier (UUID) element generated by the
Enrollee. This is a 16 byte value.
RF Bands: Indicates all the RF bands available on the AP. A dual-band AP must
provide it. The values are "2.4GHz" and "5GHz".
4.2.7.3 Example to Add to Registrar Using PIN Method
The user obtains a device password (PIN Code) from the STA and enters the
password into the Registrar. Both the Enrollee and the Registrar use PIN Config
method for the configuration setup. The following image outlines the process.