User's Manual

-72-
Status : Current connection status. If no connection, if will show Disconnected.
Otherwise, the SSID and BSSID will show here.
Extra Info : Display link status in use.
Channel : Display current channel in use.
Authentication : Authentication mode in use.
Encryption : Encryption type in use.
Network Type : Network type in use.
IP Address : IP address about current connection.
Sub Mask : Sub mask about current connection.
Default Gateway : Default gateway about current connection.
Link Speed : Show current transmit rate and receive rate.
Throughout : Display transmits and receive throughput in unit of Mbps.
Link Quality : Display connection quality based on signal strength and TX/RX
packet error rate.
Signal Strength 1 : Receive signal strength 1, user can choose to display as
percentage or dBm format.
Signal Strength 2 : Receive signal strength 2, user can choose to display as
percentage or dBm format.
Signal Strength 3 : Receive signal strength 3, user can choose to display as
percentage or dBm format.
Noise Strength : Display noise signal strength.
HT : Display current HT status in use, containing BW, GI, MCS, SNR0, and SNR1
value. (Show the information only for 802.11n wireless card.)