User's Manual

Utility Config
-73-
4.3 Security
4.3.1 Auth. \ Encry. Setting - WEP/TKIP/AES
Figure 3-1 Auth.\Encry. Settings
Authentication Type: There are 7 authentication modes supported by RaUI. They
are open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.
Encryption Type: For open and shared authentication mode, the available
encryption types are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK
authentication mode, the encryption type supports both TKIP and AES.
8021X: This is introduced in the topic of Section 3-2.
WPA Pre-shared Key: This is the shared key between the AP and STA. If
operating in WPA-PSK and WPA2-PSK authentication mode, this field must be
filled with a key between 8 and 32 characters in length.
WEP Key: Only valid when using WEP encryption algorithm. The key must match
the AP's key. There are several formats to enter the keys.
Hexadecimal - 40bits: 10 Hex characters.
Hexadecimal - 128bits: 32Hex characters.
ASCII - 40bits: 5 ASCII characters.
ASCII - 128bits: 13 ASCII characters.
**Powered by Meetinghouse.
4.3.2 802.1x Setting
802.1x is used for authentication of the "WPA" and "WPA2" certificate by the server.