User's Manual
Table Of Contents
Management Guide
-15-
To add a new profile:
1.
Click the “Add” button. The add profile window pops up.
Note: you could also add a new profile quickly by selecting an available network in
the “Network” function then press the “Add to Profile” button.
2.
Fill in information for this profile in the system config section:
Profile Name
Choose a name for this profile, or use default name defined by
system.
SSID
Fill in the intended SSID name or use the drop list to select from
available Aps.
Power Save Mode
Choose from CAM (Constantly Awake Mode) or PSM (Power
Saving Mode).
Network Type
There are two types, infrastructure and 802.11 Ad-hoc
mode. Under Ad-hoc mode, you could also choose the
preamble type; the available preamble type includes auto and
long. In addition to that, the channel field will be available
for setup in Ad-hoc mode.
RTS Threshold
For adjusting the RTS threshold number by sliding the bar or
key in the value directly. The default value is 2347.
Fragment
Threshold
Adjust the Fragment threshold number by sliding the bar or key
in the value directly. The default value is 2346.
3.
Select an encryption type and fill in the corresponding wireless network