User's Manual
Table Of Contents
Appendix
-31-
Receive CTS
frame.
Frames
Retransmitted
Successfully
Successfully retransmitted frames numbers.
Frames Received
Successfully
Frames received successfully.
Frames Received
With CRC Error
Frames received with CRC error.
Frames Dropped
Due To Out-of-
Resource
Frames dropped due to resource issue.
Duplicate Frames
Received
Duplicate received frames.
Reset Counters
Reset counters to zero.
5.2 Troubleshooting
If you encounter any problem when you’re using this wireless network card, don’t
panic! Before you call your ealer of purchase for help, please check this
troubleshooting table, the solution of your problem could be very simple, and you can
solve the problem by yourself!
Scenario
Solution
I can’t find any wireless access
point
1.
Click ‘Rescan’ for few more times and see if
you can find any wireless access point or
wireless device.
2.
Please move closer to any known wireless
access point.
3.
‘Ad hoc’ function must be enabled for the
wireless device you wish to establish a direct
wireless link.
4.
Please adjust the position of network card
(you may have to move your computer if you’re
using a notebook computer) and click
‘Rescan’ button for few more times. If you can
find the wireless access point or wireless
device you want to connect by doing this, try to
move closer to the place where the wireless
access point or wireless device is located.
Nothing happens when I click
‘Launch config utilities’
1.
Please make sure the wireless network card
is firmly inserted into your computer’s PCI slot.
If the Wireless configuration utility’s icon is
black, the network card is not detected by your
computer. Switch the computer off and insert
the card again. If this doesn’t work, contact the
dealer of purchase for help.
2.
Reboot the computer and try again.
3.
Remove the driver and re-install.
4.
Contact the dealer of purchase for help.
I can not establish connection
1.
Click ‘Connect’ for few more times.