User's Manual
Table Of Contents
-32-
with a certain wireless access
point.
2.
If the SSID of access point you wish to
connect is hidden, you have to input correct
SSID of the access point you wish to connect.
Please contact the owner of access point to
ask for correct SSID.
3.
You have to input correct passphrase /
security key to connect an access point with
encryption. Please contact
4.
the owner of access point to ask for correct
passphrase / security key. The access point
you wish to connect only allows network cards
with specific MAC address to establish
connection. Please go to ‘About’ tab and write
the value of ‘Phy_Addess’ down, then present
this value to the owner of access point so he /
she can add the MAC address of your
network card to his / her access point’s list.
The network is slow / having
problem
when transferring large files
1.
Move closer to the place where access point
is located.
2.
Enable ‘Wireless Protection’ in ‘Advanced’
tab.
3.
Try a lower TX Rate in ‘Advanced’ tab.
4.
Disable ‘Tx Burst’ in ‘Advanced’ tab.
5.
Enable ‘WMM’ in ‘QoS’ tab if you need to use
multimedia / telephony related applications.
6.
Disable ‘WMM – Power Save Enable’ in
‘QoS’ tab.
7.
There could be too much people using the
same radio channel. Ask the owner of the
access point to change the channel number.
Please try one or more solutions listed above.