User's Manual

Clicking the Ralink icon will bring up the RaUI main window. Users can find the surrounding APs

in the list. The currently connected AP will be shown with a blue icon beside it, as shown in Figure

1-13. Users may use the advanced tab to configure more advanced features provided by Ralink's

wireless NIC. For details on configuring the advanced features, please check the Advance setting

section.

Figure 1-13 Show connection status by using WZC to initiate the connection

4.2 RaUI

4.2.1 Start

4.2.1.1 Start RaUI

When starting RaUI, the system will connect to the AP with best signal strength without setting a

profile or matching a profile setting. When starting RaUI, it will issue a scan command to a wireless

NIC. After two seconds, the AP list will be updated with the results of a BSS list scan. The AP list

includes most used fields, such as SSID, network type, channel used, wireless mode, security status and

the signal percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog box is

shown in Figure 2-1.