User's Manual

4.2.2.2Add/Edit Profile
There are three methods to open the Profile Editor dialog box.
You can open it by clicking the "Add to Profile" button in the Site Survey tab.
You can open it by clicking the "Add" button in the Profile tab.
You can open it by clicking the "Edit" button on the Profile tab.
Figure 2-2-2 Configuration
Profile Name: The user can chose any name for this profile, or use the default name defined by
system.
SSID: The user can key in the intended SSID name or select one of the available APs from the
drop-down list. Power Save Mode: Choose CAM (Constantly Awake Mode) or Power Saving
Mode.
Network Type: There are two types, infrastructure and 802.11 Ad-hoc mode. Under Ad-hoc mode,
user can also choose the preamble type. The available preamble type includes auto and long. In
addition, the channel field will be available for setup in Ad-hoc mode.
RTS Threshold: User can adjust the RTS threshold number by sliding the bar, or key in the value
directly. The default value is 2347.
Fragment Threshold: User can adjust the Fragment threshold number by sliding the bar or key in the
value directly. The default value is 2346.
Channel: Only available for setting under Ad-hoc mode. Users can choose the channel frequency to
start their Ad-hoc network.
Authentication Type: There are 7 type of authentication modes supported by RaUI. They are open,
Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.
Encryption Type: For open and shared authentication mode, the selection of available encryption
type are none and WEP. For WPA, WPA2, WPA-PSK andWPA2-PSK authentication mode,
both TKIP and AES encryption is available.
802.1x Setting: This is introduced in the topic of "Section 3-2 : 802.1x Setting".
WPA Pre-shared Key: This is the key shared between the AP and STA. For WPA-PSK and
WPA2-PSK authentication mode, this field must be filled with a key between 8 and 32 characters in
20