User's Manual

The DLS settings are explained as follows:
Fill in the blanks of Direct Link with MAC Address of STA. The STA must conform to these two
conditions:
1. Connect with an AP that supports DLS features.
2. Ensure that DLS is enabled.
The Timeout Value indicates the time in seconds before it disconnects automatically. The value is an
integer. The integer must be between 0~65535. A zero value specifies that it stays connected. The
default Timeout Value is 60seconds.
Click "Apply"
4.2.6.3Example to Configure to Enable Wi-Fi Multi-Media
If you want to use "WMM-Power Save" or "Direct Link" you must enable WMM. The setting method
of enabling WMM indicates as follows:
Click "WMM Enable".
30