User's Manual

Device Password ID: Indicates the method or identifies the specific password that

the selected Registrar intends to use. The AP in PBC mode must indicate0x0004

within the two-minute Walk Time.

Value Description

0x0000 Default(PIN)

0x0001 User-specified

0x0002 Rekey

0x0003 Display

0x0004 Push Button (PBC)

0x0005 Registrar-specified

0x0006-0x000F Reserved

Selected Registrar: Indicates if the user has recently activated a Registrar to add an

Enrollee. The values are "TRUE" and "FALSE".

State: The current configuration state of the AP. The values are "Unconfigured" and

"Configured".

Version: The specified WPS version.

AP Setup Locked: Indicates if the AP has entered a locked setup state.

UUID-E: The universally unique identifier (UUID) element generated by the

Enrollee. The value is 16 bytes.

RF Bands: Indicates all of the RF bands available to the AP. A dual-band AP must

provide it. The values are "2.4GHz" and "5GHz".

4.2.7.3Example to Add to Registrar Using PIN Method

The user obtains a device password (PIN Code) from the STA and enters the password into the

Registrar. Both the Enrollee and the Registrar use PIN Config method for the configuration setup. The

following image outlines the process.

Select "Enrollee" from the Config Mode drop-down list.