User Manual

17
5. Ralink Wireless Utility (RaUI)
5.1 Start
5.1.1 Start RaUI
When starting RaUI, the system will connect to the AP with best signal strength
without setting a profile or matching a profile setting. When starting RaUI, it will
issue a scan command to a wireless NIC. After two seconds, the AP list will be
updated with the results of a BSS list scan. The AP list includes most used fields, such
as SSID, network type, channel used, wireless mode, security status and the signal
percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog
box is shown in Figure 2-1.
Figure 2-1-1 RaUI section introduction
There are three sections to the RaUI dialog box. These sections are briefly described
as follow.
Button Section: Include buttons for selecting the Profile page, Network page,
Advanced page, Statistics page, WMM page, WPS page, the About button, Radio
On/Off button and Help.
Figure 2-1-2 Button section