User Manual

27
5.4 Advanced
5.4.1 Advanced
Figure 2-4 Advance function
 Wireless mode: Select wireless mode. 2.4G, 5G and 2.4+5G are
supported.(2.4G/5GHz options are depend on different products)
 Wireless Protection: Users can choose from Auto, on, and off. (This is not
supported by 802.11n adapters.)
Auto: STA will dynamically change as AP announcement.
On: The frames are always sent with protection.
Off: The frames are always sent without protection.
 TX Rate: Manually select the transfer rate. The default setting is auto. (802.11n
wireless cards do not allow the user to select the TX Rate.)
 Enable TX Burst: Ralink's proprietary frame burst mode.
 Enable TCP Window Size: Optimize the TCP window size to allow for greater
throughput.
 Show Authentication Status Dialog: When you connect to an AP with
authentication, choose whether show the "Authentication Status Dialog" or not.
The Authentication Status Dialog displays the processes during 802.1x
authentication.
 Apply the above changes.