User's Manual

56/61
 Authentication type and setting method:
PEAP:
1. Select "PEAP" as the Authentication type from the drop-down list. Key-in
"wpatest2" for the identity. "Select "EAP-MSCHAP v2" from the drop-down list for
tunnel authentication and key-in the tunnel identity as "wpatest2" and the tunnel
password as "test2". These settings are the same as our intended AP's setting.
2. Click to next page.
*If you want to disconnect, please click cancel button in Authentication Status function.
*In Profile function, show "Profile Name" option only in adding AP to Profile function.
3. If the connection is successful, the dialog will appear as below.