User's Manual

Item Description
SSID It shows the SSID of AP.
BSSID
It shows BSSID of AP.
Channel
It show the current channel of AP occupied.
Type It show which type AP acts.
Encrypt It shows the encryption status.
Signal It shows the power level of current AP.
Select Click to select AP or client you'd like to connect.
Refresh
Click the Refresh button to re-scan site survey on the screen
Connect
Click the Connect button to establish connection.
3.3.10 LAN Interface Setup
This page is used to configure the parameters for local area network that connects to the LAN ports of your WLAN AP
Router. Here you may change the setting for IP address, subnet mask, DHCP, etc.
Screen snapshot - LAN Interface Setup
- 31 -