User's Manual

Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP range parameters. The parameters that you
leave as blank will be ignored. The priority of this rule will be applied to packets that match classification criteria of this
rule. You can limit bandwidth consumed by packets that match this rule or guarantee bandwidth required by packets that
match this rule.
Item Description
Rule Name The name of this rule.
Bandwidth You can assign the download or uploadbandwidth by the unit of Kbps
(1024 bit per second). You can limit the maximum bandwidth
consumed by this rule by selecting “Maximum”. You also can reserve
enough bandwidth for this rule by selecting “Guarantee”
Local IP
Address(from/to)
Enter the local IP address range of the packets that this rule will apply
to. If you assign 192.168.2.3 - 192.168.2.5, it means 3 IP
addresses:192.168.2.3,192.168.2.4 and 192.168.2.5
Local Port Range Enter the local port range of the packets that this rule will apply to. You
can assign a single port number here or assign a range of port numbers
b
y assigning the first port number and the last port number of the range.
- 53 -