User's Manual

rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Preamble Type Click to select the Long Preamble or Short Preamble support
on the wireless data packet transmission.
Broadcast SSID Click to enable or disable the SSID broadcast function.
IAPP Click to enable or disable the IAPP function.
802.11g Protection Protect 802.11b user.
RF Power Level Select the TX Power from 10-14dBm to 14-17dBm or
17-19dbm.
ACK Timeout The Acknowledgement Timeout means from remote to local
data transmission, one parameter to control both
acknowledging action to guaranty those packets have
already be received. Usually, for short distance, keep default
setting is proposed. If there is long distance application, have
minor increased with this parameter will be proposed.
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
Wireless - Security Setup
This p
age allows you setup the wireless security. Turn on WEP, WPA, WPA2 by using encryp
tion keys could prevent
any unauthorized access to your wireless network.
Item Description
Encryption Select the encryption supported over wireless access. The
encryption method can be None, WEP, WPA, WPA2 or
WPA-Mixed.
Use 802.1x
Authentication
While Encryption is selected to be WEP. Click the check box
to enable IEEE 802.1x authentication function.
22