User Manual
Table Of Contents
Quick Installation Guide
Model: LP-8617N
NOTE: Do not insert the USB adapter until the software/driver has been installed.
High Power Wireless-150N Compact USB Adapter
Insert the Setup CD Install Software
The menu page should appear.
Select the instruction for your operating system and
install the driver for the USB adapter.
Follow the Instructions for Driver Installation
A. From the Menu page, select Driver Installation B. Start the Driver Installation
If the Menu page does not appear, browse the if prompted, click Next to begin the installation
CD drive and double-click the autorun.exe file
C. Continue the Driver Installation D. Restart your Computer
Follow the instructions that appear for installation A prompt will appear asking you to restart your
computer. Select Yes and click Finish to restart.
E. Insert the High Power USB Adapter
After the computer has fully rebooted, locate a USB port and insert the
USB Adapter. Windows should automatically begin to install the driver
for using the USB Adapter.