User's Manual

Antenna base stand drawing
About the screws
Lock the screw tightly but remember to keep some free spaces left (about 3 to 5mm) like
diagram below; therefore the antenna can be hanged onto the wall with both the screws.
The second method for mounting the antenna onto a wall:
The length between Point A and Point B is 62 mm. -Fix 2 nail or screws between an interval
of 62 mm by a ruler on the wall for mounting the antenna -Cut the
antenna base stand
drawing from the Quick Installation Guide and place it where to mount on the wall and fix 2
nails or screws aiming at the Point A and B on the drawing.