User's Manual

10
1.5.4 I/O Interface
Item
Description
Main
It mainly used as Power over Ethernet (PoE) port, which allows the router powered up
by PoE adapter when the connection is established by RJ-45 Cat.5 cable. It supports
auto-sensing on 10/100M speed, half/ full duplex, and complies with IEEE 802.3/ 802.3u
respectively.
Secondary
The Secondary Ethernet port allows users to connect to another device through RJ-45
Cat.5 cable. It supports auto-sensing on 10/100M speed, half/ full duplex, and complies
with IEEE 802.3/ 802.3u respectively.
(Note: In Operation mode the AP router’s secondary port will be WAN Port by default).
Reset Button
Press continually the reset button at least 5 seconds to reset the configuration
parameters to factory defaults
Earth Ground
It used to connect the metal line to ground in order to avoid the device from external
electrical damage.
Note. LP-2396K built in PoE pass through function on Secondary Ethernet port. It means the
Secondary Ethernet port is able to provide 24V power for a secondary device if this function
enabled on Web Configuration (Please refer to the statement on Advanced Setting of Radio
menu).